300mm Roller Diameter Wire Mesh Flattening Machine With Working Width 1.5m
Introduction:
Anao Company produced PW Series wire mesh flattening machine is specially designed for expanded metal mesh flattening.It’s a accessory equipment of expanded metal machine. It can make expanded metal mesh smoothly.And the flattened expanded metal mesh will have much more widely different applications with nice appearance.Flattening machine can flatten expanded metal mesh's strand.
Flattening machine is specially used for expanded metal mesh,aluminum expanded metal mesh,stainless steel expanded metal mesh,black wire mesh, and other kinds of wire mesh.
When expanded metal machine finished produce expanded metal mesh or aluminum expanded metal mesh,the mesh surface is not pretty well,especially small expanded metal mesh or aluminum expanded metal mesh(With small LWD&SWD),will be need further processing,then should use flattening machine flatten the mesh.
Flattening Machine PW45 Parameter:
| Flattening Machine PW45 |
| Working width |
1500mm |
| Roller Diameter |
300mm |
| Gear Reducer |
JZQ350 |
| Working speed |
12-15m/min |
| Motor |
7.5KW 220/380v 50Hz |
| Reducer transmission ratio |
40.17 |
| Measurement |
2500mm*1280mm*1320mm |
Operation of flattening machine:
- Adjust the flattening machine's left and right pressure vessels,slowly push the uneven mesh into the front table.
- After the two pressure rollers flattening,then collect or recoil the mesh in the other side
- .For the finished production expanded metal mesh,flattened by flattening machine,not only planish expanded metal mesh’s connect points, let mesh surface smooth and beautiful,at the same time can eliminated the internal forces during produce expanded metal mesh,thus improved the mesh rigidity.
Flattening machine can customize roller diameter range from 300mm to 800mm,working width 1000mm to 3000mm.
Flattening machine PW30 in stock:
Product Tags:
|
|
12 - 15 M / Min Metal Flattening Machine For Wire Mesh 300 Mm Roller Diameter Images
|
